FLOOR CLEAN AND CONDITIONER

DIRECTION: SHAKE WELL BEFORE USING

MORE INFO
Floor Clean & Conditioner
This is a one step cleaner/conditioner for use on all natural stone floor as well as ceramic/porcelain, quarry tile and composition flooring. Contains special additive to help control slippery floors.

WHERE TO USE
Use on all natural stone floor (marble, granite, limestone, slate, flagstone, adoquin etc.) as well as ceramic/porcelain, quarry tile and composition flooring.

DIRECTIONS
Always test area to determine that the desired results will be achieved. Sweep, dust-mop or vacuum areas of dirt and debris. Add ONE capful per bucket of water (approx. 3 gallons) for normal cleaning. [add one capful or more per gallon of water for heavily soiled or slippery floors] Wet mop lightly soiled or slippery floor.

HIGH TRAFFIC AREAS
Thoroughly wet, make sure all grout and lower areas are fully wet. Let stand for 5 minutes, agitate if necessary and pick up. Rinsing is not normally necessary. Floor may be buffed with terry cloth or white/soft nylon pad if streaking should occur.

SPECIFICATIONS:

Biodegradable
Non-Corrosive
Non-Fuming
Non-Caustic
Non-Flammable
Non-Combustible
Non-Toxic
Water Soluble
Does not contain harmful or harsh alkalis, acids, phosphates, chloride or caustics.

See MSDS sheet for further information.